Ring Doorbell With Free Installation

Free

For a Ring Doorbell to work effectively, it must be positioned properly. However, what that means differs depending on your home and the version of the Ring Doorbell that you have. With the right placement and angle, a Ring Doorbell can work well for any home.

Download the Manual - Ring Video Doorbell Pro. Ring products are designed for easy setup and use. To find the user manual for your Ring Video Doorbell Pro in your language, select it in the list below. Click here for the North American English version of the manual. See our helpful DIY guides to set up Ring doorbells, security cams, alarms, and other devices; or connect with one of our trusted professional installers for a worry-free setup. Get a free Security Yard Sign when you spend $199.

Ring recommends mounting the doorbell approximately 48 inches above the ground. The doorbell must be mounted flat against a door frame, door, or wall, but there are additional installation kits that adjust the vertical and horizontal angle of a Ring Doorbell as well.

Whether you are a new Ring Doorbell owner or moving to a new place, you will need to know all the details of how to position your Ring Doorbell, including the steps and tools you will need.

Ring Doorbell Positioning

There are several factors to consider when positioning your Ring Doorbell:

  • Power Source
  • Height
  • Angle

Ring Doorbell Power Source

First, where you place your Ring Doorbell will depend on its primary power source:

  • If you have the Ring Doorbell Pro, it must be hard-wired to your home’s existing doorbell wires. However, this limits your options for positioning your doorbell.
  • If you want more positioning flexibility, you may want to consider a battery-operated Ring Doorbell or Doorbell 2. These doorbells can be installed anywhere on a door frame, door, or outer or side wall of your home.
  • While Ring’s Peephole Cam is also battery-operated, it must be installed on a door’s existing peephole, so there is no flexibility when positioning this video doorbell.
  • The Ring Doorbell Elite offers some placement flexibility. It is powered with an ethernet cord from your home’s internet router. You can place the doorbell where your home’s existing doorbell is located, or you can cut a hole in your door frame or wall and feed the ethernet cord through it. The doorbell can be installed at any place where it can be connected to the ethernet cord.

Ring Doorbell Height

Ring Doorbells work best when mounted about 48 inches or 4 feet above the ground. Place your doorbell at this height whether you are mounting it on a door frame, door, or outer wall of your home.

This below eye-level height prevents the motion sensors from detecting movement far from your door, such as cars passing by or people walking their dogs on the sidewalk. The motion sensors can detect motion from five to 30 feet away with a range of up to 160 degrees horizontally.

Your doorbell’s camera has a much larger vertical field of view than the motion sensor does, so you will be able to see people’s faces as they approach your door even though the camera is below eye level.

To give you a better idea of what your camera will see, here is a table with each Ring Doorbell’s field of vision.

Ring Doorbell Angle

Ring offers two different types of additional installation kits that change the angle of your Ring Doorbell.

  • The Wedge Kit gives you the ability to angle your doorbell up or down from five to 15 degrees.
  • The Corner Kit allows you to adjust the horizontal angle of your doorbell from 15 to 55 degrees.

The Ring Doorbell 2 and Doorbell Pro come with both the wedge and the corner kit. If your Ring Doorbell does not come with an installation kit, make sure to choose the kits compatible with your device.

These installation kits are particularly helpful if you have a hard-wired doorbell because they give you more flexibility to position your doorbell at the best angle. For example, if your doorbell is higher than four feet off the ground, you can use the wedge kit to angle it down and avoid unwanted motion alerts.

To use the Ring Corner and Wedge Kits:

  1. Position the angle mount where you would like your doorbell to go and check the level with the provided level tool.
  2. Using the provided drill bit or screwdriver, screw the shorter two screws into the mount’s top and bottom holes.
  3. For installation on a brick, concrete, or stucco wall, use the provided anchors in the screw holes. (The anchors are not needed for installing an angle mount on wood.)
  4. You can increase the doorbell’s angle by removing the screws, placing an additional mount over the first one, and screwing the mounts into place using the longer screws.
  5. Attach your doorbell to the angle mount(s). If you want to use both a corner mount and a wedge mount, install the corner mount, then the wedge mount, and then the doorbell.

Finding the Best Ring Doorbell Placement

Don’t be afraid to get creative when installing your Ring doorbell and test different placements and angles until you find the perfect position to optimize the performance of your video doorbell.

There are some limitations to Ring’s flexible installation options. Ring doorbells cannot be mounted horizontally. The doorbells do not have a screen rotation feature so the videos and live stream would be sideways and motion detection would not work properly.

How to Mount Your Ring Doorbell

You can mount your Ring Doorbell on your own using the provided installation kit. Directions vary depending on the version of the Ring Doorbell you have and where you are installing it.

Battery-Operated Ring Doorbell and Doorbell 2

You can install a battery-operated Ring Doorbell or Ring Doorbell 2 almost anywhere, including on brick and concrete.

  1. Charge the doorbell battery with the provided USB charger. The doorbell is fully charged when only the green light is illuminated.
  2. Place the mounting bracket wherever you want to install your doorbell. Use the provided level tool to confirm that the doorbell is level.
  3. Use a drill with the provided drill tip and screws to mount the bracket at the four corners.
  4. If you are installing your doorbell on a brick, concrete, or stucco wall, place the provided anchors in the holes you drill, and place the screws inside the anchors. If you are installing your doorbell on a wooden door frame, door, or outer or side wall, place the screws directly in the holes.
  5. Place the doorbell on the mounting bracket and tighten the two security screws on the bottom.

Hard-Wired Ring Doorbell and Doorbell 2

Hard-wired Ring Doorbells must be installed where your existing doorbell is located.

  1. Shut off the power to your doorbell from your home’s breaker box.
  2. Remove and disconnect your home’s existing doorbell.
  3. Place the mounting bracket over the wires and check the level with the provided level tool.
  4. Use a drill with the provided drill tip and screws to mount the bracket.
  5. Remember to use the provided anchors in the holes you drill if you are installing your doorbell on a wall made of brick, concrete, or stucco.
  6. Wrap one of the doorbell’s wires around each of the two screws in the middle of the mounting bracket. Make sure the wires are not touching.
  7. Place the doorbell on the mounting bracket and tighten the two security screws on the bottom.

Ring Doorbell Pro and Doorbell Elite

The Doorbell Pro and Doorbell Elite have some superior features to the original Ring Doorbell and Doorbell 2, but they are also more challenging to install. They both require the installation of a provided Power Kit in addition to the doorbell.

We recommend watching the instructional videos linked below if you need to install one of these doorbells:

Ring doorbell installation service

Installation Manual For Ring Doorbell

Ring also offers professional installation if you are not comfortable installing the Power Kit on your own.

Conclusion

How Much Does It Cost To Have Ring Doorbell Installed

In summary, the best place for you to position your Ring Doorbell is four feet off the ground. If you own a hard-wired Ring Doorbell, your mounting options become limited—especially in terms of your Ring Doorbell’s height—but you can still adjust the device’s angle by using a Wedge Kit or Corner Kit.

Ring Doorbell Pro Installation

Is your door’s frame too narrow to install a Ring Doorbell? Check out this article for tips and tricks!